The 3200 range provides you with precise temperature control with an emphasis on simplicity and ease of use.  Available in four formats, a simple 'QuickStart' code can be used to configure all essential functions required to control your process.  If you prefer, you can specify what you need at point of order and we will ship the unit preconfigured to your requirements.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian.  More advanced features are configured using iTools with a PC based configuration wizard - giving an easy to use, instructive guide to all the functions in the controller. 3200 are also available as Indicator and alarm units.

Heater current monitoring

A current transformer input provides display of the heater current and a health check on the load. Partial load failure, heater open circuit and SSR faults are detected and displayed as scrolling alarm messages as well as providing an alarm output. On the 3208 and 3204 a front panel ammeter displays the heater current.

Setpoint programmer

Heat treatment profiles can be programmed using the 8-segment programmer. Holdback, at the beginning of each segment can be used to guarantee the soak periods. A digital event output can be triggered in any segment to initiate actions within the process.

Custom text messaging

Custom messages can be created with iTools and downloaded to the 3200 to display when an event, alarm or process condition occurs. This provides the operator with good visibility of the status of the process.

Remote setpoint

An option exists for the 3200 to have a Remote Analogue Input. This can be either volts or mA and is used to allow the setpoint to be generated by a master controller or PLC.